Networking
Physical Connection
When using a Synapse coprocessor off robot, you should plug the coprocessor into a physical router/radio. You can then connect your laptop/device used to view the webdashboard to the same network. Some devices may support a "gadget mode" that allows sharing internet via a USB connection, but this isn't promised.
Ensure that the radio’s DIP switches 1 and 2 are turned off; otherwise, the radio PoE feature may electrically destroy your coprocessor. More info.
We STRONGLY recommends the usage of a network switch on your robot. This is because the second radio port on the old FRC radios is known to be buggy and cause frequent connection issues that are detrimental during competition.
In order to configure robot communication and network identity for the coprocessor, read Network Settings
Camera Stream Ports
All of the camera stream ports start at port 1180 and go up from there, and the HTTP address for them would be https://<deviceip>:118X/?action=stream
Last updated